I’ve had a basement flood because the home didn’t have proper drainage or a sump pump. I’ve also seen a clogged gutter overflow and cause rot on the siding.
Those experiences change what you notice when you walk up to a house in the rain. I’m looking at how well the gutters work and whether water is pooling in the yard.
Honestly, it can be hard to know how a property handles rain until it rains. But keeping up with maintenance gives you a better starting point: keep moss off the roof, clean the gutters, check the downspout connections, and make sure water drains away from the house.
This Seattle-area fall home maintenance checklist covers seven things I’d pay attention to before the next downpour.
Your rainy-season walk-around
Check the gutters. Follow the downspouts. Clear drain openings. Notice pooling water. Look for basement moisture. Watch roof moss. Investigate mold.
1. Check whether your gutters actually work
A gutter can look fine from the driveway and still overflow during a downpour.
From a safe spot on the ground, watch for water spilling over the edges, leaking at seams, or running down the siding. Those are clues that something needs attention.
I’ve seen an overflowing, clogged gutter lead to siding rot. The gutter was a maintenance issue; the siding became a repair issue.
Clean the gutters and have damaged or sagging sections checked. If trees surround your home, check again as leaves continue to fall.
2. Make sure every downspout is connected—and follow the water
Look for disconnected joints, missing sections, and outlets that dump water beside the house.
Then follow the water. Does it move away from the foundation, or collect against it?
Seattle Public Utilities recommends directing downspout water away from the foundation without sending it onto neighboring properties. Its guidance also cautions against discharging water over a steep hillside. Read Seattle’s wet-weather preparation tips.
If you’re unsure where your downspouts should discharge, get a qualified drainage professional’s advice before changing the system.
3. Clear the places where leaves block drainage
Check driveway drains, exterior stairwell drains, and other drain openings around your property.
A drain at the bottom of a sloped driveway deserves particular attention. Water already flows toward that low point; a layer of leaves can block its way out.
Nearby street drains matter, too. Seattle Public Utilities advises keeping leaves and debris clear, working from the sidewalk or parking strip with tools rather than your hands. Report a blockage you can’t safely clear.
4. Notice where the yard stays wet
When I look at a property in rainy weather, pooling water is one of the first things I notice.
Pay attention to water collecting beside the house and areas of the lawn that stay wet long after other areas dry. In spring, those persistently soggy spots can help you identify a drainage problem to investigate before the next wet season.
Homes at the bottom of a hill deserve extra attention because water may be arriving from uphill as well as falling directly on the property.
Take photos during and after rain. They can help a drainage professional understand where water collects and how long it remains.
5. Give a basement an extra level of attention
Basement moisture is very common in the homes we see. Common doesn’t mean it should be ignored.
Look for damp areas, water stains, peeling finishes, or a persistent musty smell. If moisture returns every time it rains, investigate the source.
My own basement flooding experience taught me the importance of having drainage suited to the property. Depending on the home, that might include a professionally designed French drain, a sump pump, or other measures.
There isn’t one setup every basement needs. Have a qualified professional evaluate recurring moisture and recommend a solution. If you already have a sump pump, keep up with its maintenance and testing according to the manufacturer’s instructions.
6. Keep moss from taking over the roof
Moss control is one of the maintenance tasks I do at my own home.
Moss can hold moisture and debris against roofing materials. Oregon State University Extension explains that it can also lift shingles and allow water to reach the layers underneath. Read its roof-moss guidance.
Check the roof from the ground for moss buildup and accumulated debris. Use treatments and cleaning methods appropriate for your roofing material, following the product label and roof manufacturer’s guidance.
If you’re unsure, bring in a roofing professional. The goal is to protect the roof without damaging it during cleaning.
7. Take mold seriously—and fix the moisture source
We’ve discovered mold in many transactions. It has required remediation, and sometimes it has shut down the deal.
My recommendation when mold is associated with basement moisture or water damage is to bring in an experienced professional. I wouldn’t treat it as a casual weekend cleanup.
The EPA notes that some small areas can be handled by homeowners, but extensive water damage, larger affected areas, or suspected hidden mold call for additional guidance. Whatever the cleanup approach, the moisture problem needs to be corrected. Read the EPA’s mold-cleanup guidance.
If you’re thinking about selling, address recurring moisture before preparing the home for photos and showings. Painting over a stain won’t resolve the problem that caused it.
Start with a walk around your home
You don’t have to tackle everything this weekend.
Start by checking your gutters, downspout connections, and drain openings. Look for places where water collects. When it rains, observe how the system performs from a safe location.
Keeping up with those basics can reduce the chance of an unpleasant surprise when the wet weather settles in.
Have a drainage or moisture concern and aren’t sure where to start? Reach out to The Madrona Group. We can help you think through the next step and find the right type of professional.
Share this post!
